# Tag Archives: Figures

## Cable-Chains…

Part of the work that I’ve been undertaking on Mathematica is to create a series of sheets that will calculate the geometry of a cable-chain arch with a set of given parameters.  In part I’m interested in how the cable-chain arch can behave as a deployable structure and looking to build on the work of (Li, Vu, & Richard, 2011) to see how practical a cable-chain structure can be made with regards economy, efficiency, and robustness.  Essentially a cable-chain structure is a curved arch that is sub-divided into straight sections, with cables spanning across the base of two struts as can be seen in the figure below.  Simple versions of these types of structures are widely used for the likes of temporary and deployable aircraft hangers to create large open spans.

Now that I’ve got the makings of a simple Mathematica sheet up and running and I’ve taught myself some rudimentary programming and graphics manipulation skills I’ve managed to start to knock together what I feel are some high quality illustrations for my thesis.

I’ve done this with a mixture of Mathematica to create the base diagram, which I save as a PDF.  I then import the PDF into OmniGraffle to annotate the diagram and then export to a PNG file to maintain the transparent background, this figure I can then host for linking into blogs etc.  Below is a sample figure which shows how the number of segments (nSeg) affects the internal area available for habitation within a typical parabolic arch.

Given that both of my brothers are colour blind and I’ve never done the test, I’m not convinced on my choice of colour schemes, but the good news is that it won’t take long to change if it turns out I’ve made my figures look like something off the set of Austin Powers.

So far I’m finding OmniGraffle quite limited compared to Visio that I’ve been using for my diagrams for perhaps 20 years or so.  I decided to use OmniGraffle though as most of my writing work is done on a Mac, although I also have a PC so I can always create the more complex diagrams on Visio if need be, especially as I’ve managed to get a legitimate copy from work for £12.

I’d love to hear how other engineers and academics approach creating technical figures and sketches on their Macs though, I’ve a feeling that I’m really missing out on something and there’s got to be a much slicker workflow out there.

References:

Li, Y., Vu, K. K., & Richard, J. Y. (2011). Deployable Cable-Chain Structures: Morphology, Structural Response And Robustness Study. Journal for the International Association for Shell and Spatial Structures, 52(168), 83-96.